Amaircare 4000 HEPA CHEM Air Purifier
for Effective Extraction of Dust, Heavy Chemicals and Fumes at a Source. Amaircare 4000 HEPA CHEM is Perfect for Print shops, Laser Engraving shops, Soldering, Welding stations, etc.
AMAIRCARE 4000 HEPA CHEMAmaircare 4000 HEPA CHEM Air Purifier - Powerful Rugged air purifier for effective Dust and Chemical Extraction at a Source.
Amaircare 4000 HEPA CHEM Air Purifier is a Rugged, Efficient comercial Amaircare Air purifier for effective removal of airborne contaminants and chemcial substances at a source. Amaircare 4000 HEPA CHEM air purifier helps keep the air in your workplace free from most air contaminants and pollutants, and therefore iis a vital tool in maintaining the workplace Health and Safety.
Benefits of Amaircare 4000 HEPA CHEM Air Purifier System:
Amaircare 4000 HEPA CHEM Air Purifier is Highly Effective in Trapping:
Amaircare 4000 HEPA CHEM Air Purifier Comes from the factory:
Amaircare 4000 HEPA CHEM Air Purifier - Replacement Filters.
Amaircare 4000 HEPA CHEM Air Purifier comes from the Factory with All Filters Installed (per model specification)
|Amaircare 4000 HEPA CHEM Replacement Filters|
Manufacturer's warranty:Amaircare 4000 HEPA CHEM Manufacturer's Warranty includes:
Amaircare 4000 HEPA CHEM Printable Product Information
|Amaircare 4000 HEPA CHEM - Spec Sheet|
Air Purifier Design
Amaircare 4000 HEPA CHEM air purifier features durable, impact resistant the all metal housing of Hexagonal design made out of 24 gauge cold rolled steel. (Amaircare 3000 model shown).
Appliance quality baked-on powder coating produces No toxic off gassing. Available in White textured color only.
The housing design is similar to Amaircare 3000 air purifier model. However, unlike preforated metal in Amaircare 3000, it features 360° steel enclosure with 6" duct collar connector for polluted air intake at the upper deck of the unit.
Clean air outlets / vents located on 4 sides out of 6 sides of the lower deck of the unit vented downward.
Quick access panels at the top of the unit ensures quick and easy filter replacement procedure.
Six wheel casters on the bottom panel ensure high level of stability and mobility at the same time, and make moving of the unit within the cleaning area almost effortless.
Air Filtration System
True HEPA Filter (Particle Filter).
True HEPA filter effectively traps over 99.97% of all airborne particles, allergens and dust down to 0.3 micron in size.
It also traps particles smaller than 0.3 micron at a rate below 99.97 %.
Features a "Perfect Seal HEPA" filter design and construction, when each filter is tested throughout construction to ensure it's integrity.
The Perfect Seal construction guarantees HEPA performance with 100% of the air passing through the HEPA media.
True HEPA effective surface area - 100 sq. ft.
Top-load filter compartment design makes HEPA and Carbon filter changing procedure convenient, fast and easy with no need for flipping the units up-side-down.
True HEPA Filter's lifetime* - 2 to 5+ years.
Activated Carbon Filter (Chemical and Odor Filter).
Standard Carbon Dust Filter effectively adsorbs most household chemicals, noxious odors and cigarette smoke.
Available optional VOC canister
The VOCs canister is available as a part of the optional Plus Annual Filter Kit for effectively removal of hazardous VOCs that may off-gas from cleansers, paints, carpet, wallpaper, furniture, consumer electronics, etc.
Dust carbon - 4 to 6 month.
VOC Canister - up to 12 months.
Pre filter is the first stage of the air filtration system.
Washable reusable foam based pre filter traps large dust and dirt particles, and removes odors.
Pre filter protects HEPA filter from fast contamination and extends the HEPA filter's lifetime.
Pre filter covers the HEPA filter and can be easily replaced from the top of the unit.
Pre Filter's lifetime*: 4 to 6 months (under normal residential or office conditions)
Amaircare 4000 HEPA CHEM air purifier is equipped with Energy efficient Thermally protected Class "B" insulated motor with centrifugal fan and a Variable Speed control.
One piece Motor / Fan assembly is factory balanced to ensure a vibration and noise-free operation. The compact design of a motor / fan assembly leaves more room for placement of larger filters.
The motor is rated for a long continuous operation at high RPM and a long lifetime.
It is run tested for 50,000 hours of continuous operation.
PerformanceThe Air flow Rating: 300 CFM (Cubic feet per minute) with all filters installed.
Level of Noise @ 6 feet: 68 dB (on High).
The maximum cleaning area for Stand-along unit:
Power RequirementsThe Electric Power supply: 120 Volts, 60 Hz.
Also available for 230 Volts, 50 / 60 Hz.
Power consumption: 120 Watt (on High Setting)
Power Rating: 1 Amps, 120 volts, 60 Hz.
Hexagonal shape housing.
Width: - 16 inch
Height - 23 inch.
WarrantyManufacturer's limited warranty includes:
CertificationCSA and NRTL (UL) approved.
Certified for USA, Canadian and overseas markets.
|Parameter||Amaircare 4000 HEPA CHEM|
|Air Filtration System||3-Stage. Foam prefilter + True HEPA filter, VOC canister.|
|Pre Filter||Foam based, washable reusable.|
|HEPA Filter||Yes. 100 sq. ft. of 99.97% efficiency True HEPA filter media.|
|Carbon Filter||VOC Canister with 6.5 lbs. of granulated carbon for removal of VOCs and Heavy chemicals.|
|Anti Microbial Filter||No|
|Ultra Violet (UV) Bulb||No|
|Filter Change Monitor||No|
|Air Quality Sensor||No|
|Automatic Operating Mode||No|
|Motor / Fan Assembly||Single Energy efficient, thermally protected Class "B" insulated motor with centrifugal fan.
Run tested for 50,000 hrs.
|Fan Rating, CFM||300 CFM (with filters installed).|
|Number of Speed Settings||Variable Speed Fan Control.|
|Air Flow by Speed, CFM||50-300|
|Clean Air Delivery Rate (CADR), CFM||300 (according to manufacturer's data)|
|Maximum Cleaning Area, sq. ft.||2250 sq. ft. @ 1 air change per hour|
|Recommended Cleaning Area, sq. ft.||1125 sq. ft. @ 2 air changes per hour|
|Level of Noise||35 dB (Low) / 68 dB (High) @ 6 feet distance.|
|Power Consumption, Watts.||120|
|Dimensions, inch.||16" (Hex) x 23" (H)
Including the wheel casters.
|Connectors, Diameter inch.||Intake: 6" Duct Collar at a top.
Outlet: 4 out of 6 sides of the bottom deck.
|Weight, lbs.||55 lbs. (with standard VOC canister)|
|Manufacturer's Warranty, Years||5 Years Motor / Fan Assembly.
1 Year All other components (excluding filters).
|Power Requirement.||120 Volts 60 Hz, 1.0 Amps
230 Volts, 50 / 60 Hz also available
|ENERGY STARŪ qualified||No|
|Certification.||CSA, NRTL (UL) approved.|
Amaircare 4000 HEPA CHEM Air Purifier as Stand Alone Air Purifier System.
Amaircare 4000 HEPA CHEM Air purifier is a powerful and versatile air purifier system for variety of commercial, industrial and workshop air purifier applications.
Amaircare 4000 HEPA CHEM Air Purifier is connected to the exhaust vents of plotters, printers, laser engraving machines, welding stations using the the following connector:
No hard wire connection is necessary. Plug-in only.
Typical Application for Printshops.
Amaircare 4000 HEPA CHEM Air purifier is designed to remove nearly 100% of all solid airborne contaminants, chemicals substances and VOCs. The 4000 HEPA CHEM is connected to the exhaust vent of the plotter or a printer. It creates a negative pressure inside the plotter. The aiir pollutans that are created in the printing process are drawn through the air filtration system, which removes a significant amount of solid and gasesous air contaminants. The 'clean'
Typical Application for Laser Engraving Workshops.
Amaircare 4000 HEPA CHEM Air purifier is also perfect for removal of Toxic fumes generated by Laser engraving machines. Connected to the exhaust vent of Laser Engraving machine, the 4000 HEPA CHEM creates a negative pressure inside machine. The toxic fumes created during the laser engraving process are drawn throguh the 4000 HEPA CHEM's air filtration system.. The 'clean' air is vented out back into the room through the four vents located at the bottom of the air purifier.
Typical Application for Welding Workshops.
Amaircare 4000 HEPA CHEM Air purifier is also perfect for purposes of removal Toxic fumes and heavy dust generated by the welding process. Connected to the exhaust hood of the welding station, the 4000 HEPA CHEM creates a negative pressure in the immediate working area. The air pollutants and toxic fumes created during the welding process are drawn into the 4000 HEPA CHEM's air filtration system, where they are trapped by large true HEPA filter and activated carbon canister. The 'clean' air is vented out back into the room through the four vents located at the bottom of the air purifier.